Tool presetter
Tool presetter
ISⅢ-6040
The utmost model with CCD camera
Feature
- Equipped with CCD cameraCCD camera imaging process enables you to measure both X and Z value in one time through non-contact practice
- Imaging processUnlike conventional projector type value was measured by human eyes, everyone can perform accurate, stable measurement.
- No concern of chippingNon-contact practice means no concern about damaging the tools
- Touch panelThe measuring program developed by Kyoritsu technology, makes it easy-to-operate.
- One-touch switchingmeasurement modes are switchable by one-touch practice. Run-out, R and angle value are easy to measure
- Real view of tool edgeEquipped with reflected lighting, it is able to show the real view of tool edge
- Electric joystickX and Z axis travel is controlled by a 2-speed joystick
Spec
| Measuring motion method | Electric 2 stage movement, manual movement |
|---|---|
| Measuring range | Length direction(Z axis):50 ~ 600mm Radial direction(X axis):0 ~ ϕ400mm |
| Min value of counter reading | Length direction(Z axis):0.001mm Radial direction(X axis):ϕ0.002mm |
| Air supply | 0.4MPa(4kgf/cm2) |
| CCD pixels | 1,296 x 966Pixel |
| Real viewing field | About6.7 x 4.9mm |
| Attach and release | Air |
| Power supply | AC100V |
| Weight | 320kg |
| Shank size | BT50, BT45, BT40, BT35, BT30, S20T, HSKA100, HSKA63, HSKA50, HSKA40, HSKA32 HSKA32 is only for tools other than center-through type Choose one shank from the size list above, if it's BT shank, please check the type of stud bolt. |
| Standard bar | Shank size: 1piece Stud bolt is provided for BT shank only Designate stud bolt type. |
|---|---|
| Wooden box | For storage of standard bar |
| Cover | 1 for spindle, 1 for machine body |
Dimensions
zoom